Crank pulley puller
4 posters
Page 1 of 1
Crank pulley puller
Anybody got a crank pulley puller, that I could borrow pleeeeeeeeeeeeeeeeease! :-)
Re: Crank pulley puller
Soz I haven't got one, I have always used a rubber hammer and large screwdriver never needed one as of yet.
Grizzly- Club Member
- Posts : 1358
Join date : 2011-02-04
Location : Hampshire
Re: Crank pulley puller
Okay buddy, this is on tight! Got a plan though I think, now I've sat and had a think!!
Re: Crank pulley puller
As Daz says really you should be able to pry it off with a screw driver or crow bar. If the engine is out the car I usually use a large 3 prong puller but I don't think that fits with the engine in the car. I did make up one using a piece of angle iron and some modified bolts that works on the std pulleys but can't lay my hands on it at the moment
owen- Club Member
- Posts : 220
Join date : 2011-02-19
Re: Crank pulley puller
Inspired by Owen, I made myself a 'Heath Robinson' puller, which worked a treat!!
Re: Crank pulley puller
I have a box of 3 legged pullers. I am coming to the meet on friday you are welcome to borrow them.
Aussiboris- Club Member
- Posts : 273
Join date : 2011-03-06
Age : 44
Location : Bournemouth
Re: Crank pulley puller
New welder come in handy already then
533clive wrote:Inspired by Owen, I made myself a 'Heath Robinson' puller, which worked a treat!!
Grizzly- Club Member
- Posts : 1358
Join date : 2011-02-04
Location : Hampshire
Re: Crank pulley puller
Yep, that's the sort of thing I made up to do it. Well done always more satisfying when you can make up something that works and cheaper too.
owen
owen
owen- Club Member
- Posts : 220
Join date : 2011-02-19
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|